Accu-Gold Touch
User Guide
16
USB Mode - Using Accu-Gold 2 software
Connect the control unit to a PC using the supplied micro USB cable (or use a standard USB-A to USB-B micro cable)
and attach any sensor that you would like to measure with. The maximum USB cable length is 3 meters. You can use
a 5 meter cable but you may experience interference issues in some cases. Over 5 meters requires using an active
extension (contact Radcal).
Launch Accu-Gold 2 on you computer and select "Connect via USB" on the Start screen.
Refer to the Accu-Gold 2 User Manual when in USB or WiFi Modes.
When the software displays the "Ready" status in the lower left corner of the window you can begin measuring.
