Version 1.0 - June 2015
4
User manual MV-RAD
When the torque wrench is in operation, the reaction arm will move oppositely to the direction of rotation. It
is essential that the reaction arm can react off a solid surface (adjacent to the joint to be tightened).
WARNING:
To prevent injury, always make sure that the hands of the user remain out of the range of the
reaction arm when the torque wrench is in operation.
NOTE:
To return to the normal program plus angle, enter 09760 in the third step and activate the Norm-
Program by press the “M“ button and return to the torque ready mode.
4.
Setting the torque
4.1 Setting the torque
1. the torque is set via the keypad at the top of the torque wrench
2. the torque value is selected by pressing the centre key “M”
3. the torque can be set using the arrow keys
4.
the torque value is confirmed by pressing the centre key “M” once more. This concludes setting the
torque. Now, the angle can be set, if this option is available
5. the angle is now selected. Repeat steps 3 and 4.
4.2 Torque Check program (option)
To select the Torque Check program follow the following steps:
1. press the centre key “M”
2. use the arrow keys to navigate to “password“ and press “M“
3. enter 02699 to enable the Torque Check program and press “M“
4. use the arrow keys to navigate to T-Check-Program and press “M“
5. the Torque Check program is now activated, press “Back” 3 times to get back in the torque ready
mode
When operating this torque wrench:
1. use only suitable and proper impact sockets
2. the handle can be rotated for ease of installation
3. there may be no clearance between the torque wrench and the reaction arm
4. the reaction arm is placed against the reaction point before the trigger is pulled in order to prevent
whipping movements of reaction arm
5. the trigger should be pressed until the torque wrench stops rotating.
340
0
Right
Nm
34
Degrees
Navigate (Down)
Menu key
Unit for angular degrees
Torque unit
Tool model indication
Navigate (Up)
Rotation direction indicator
Torque setting
Angle
