Sylphit-MP User Guide
4
Rackit Technology Corporation – www.rackittechnology.com – (800)636-3434
Rack-Mount Installation
1.
Measure the depth of the rack (the distance between the front and the rear mounting
rails) into which you are installing Sylphit.
2. Using the extension brackets’
mounting screws that came
with the unit, attach one
extension bracket to each side
of the unit with four (4) screws,
so that the unit’s depth will
(approximately) match the
rack’s depth. Keep the screws
somewhat loose to allow some
depth adjustment of the
extension brackets.
3.
Using mounting screws that came with
your rack, mount Sylphit onto the rack’s
mounting rails, using 2 screws on each
one of the four mounting corners.
Adjust the depth of the extension
brackets while mounting the rear
section of Sylphit by sliding the
extension brackets, to match the depth
of the rack.
4. Once Sylphit’s two front mounting ears and two rear extension brackets are firmly
installed onto the rack’s rails, tighten the four screws connecting each extension
bracket to each side of Sylphit.
