ASSEMBLY INSTRUCTIONS
STEP 1: SLIP SLEEVES
On the Bottom Pole (E), place 1 pair of slip sleeves (B) at the desired level.
Please make sure the arrow faces up and that the word “top” is right side
up. Do this for each Bottom Pole (E) and make sure that the heights are
identical for Bottom Pole (E).
Slide the pair of Slip Sleeves (B) until you hear a click to confirm the pair is
locked onto the Bottom Pole (E).Do not place more than one pair
on each Pole (E) at a time.
*For safety and stability, the lowest SHELF (A) should be lower than the 3rd
notch from the bottom.
**Note: There will be a very small gap in-between the Slip Sleeves (B)-this
is normal.
STEP 2 : INSTALLING BOTTOM SHELF
STEP 3 : INSTALLING MIDDLE POLES &
TOP POLES
Place Shelf (A) on its side and slide the Bottom Pole (E) through the holes
in the Shelf (A). Make sure that the shelf (A) corner cylinders are
positioned over the Slip sleeves (B).
Stand the unit upright.
*Note : The level side of the Shelf (A) is the Top side(the logo on the
corner cylinders should be right-side up.)
**Use a rubber mallet, if needed, to secure the Shelf (A).
Screw the Middle Pole (D) into the Bottom Pole (E) and Top Pole (C) into
the Middle Pole (D).
STEP 4: INSTALLING REMAINNING SHELVES
On Pole (C+D+E), place 1 pair of slip sleeves (B) at the desired distance
between Shelves (A). Please make sure the arrow faces up and that the
word “top” is right side up. Do this for each Pole (C+D+E).and make sure
that the heights are identical for each Pole (C+D+E).
Lower Shelf (A) over the Pole (C+D+E) so that the corner cylinders of the
Shelf (A) are positioned over the Slip Sleeves (B).
Repeat Step 4 to install remaining Shelves (A) as desired.
STEP 5: FEET LEVELERS
The Feet Levelers (F) are already screwed into the Pole and you can
adjust as needed to ensure your Shelving Rack is level.
B
STEP 6: FINISH
AND ENJOY YOUR QUALITY
RACKING SOLUTION PRODUCT
F
E
E
E
E
