Rackable Systems S3118 User Manual Download Page 3

1 Introduction 

1.1 Overview 

 

Figure 1: S3118 Storage Server 

The Rackable Systems S3118 server (figure 1) is a high-end, 3U rack mount storage server featuring 
some of the most advanced technology currently available. It is designed with today's most state-of-the-
art features: 
 

 

Available as a complete Network-Attached Storage (NAS) server appliance, an iSCSI block 
storage appliance, or as a standard Linux or Windows file/application server. 

 

Single and dual processor configurations available based on Xeon EM64T, Opteron, and Pentium 
4 platforms. 

 

Support for up to 18 swappable Serial ATA or U320 SCSI hard drives for high-density 
deployments (including two rear-accessible, swappable drives that can either be used as mirrored 
boot OS drives or as integral parts of the main RAID sets) 

 

Hard drive carriers designed for minimizing rotational vibration effects. Drive power and activity 
LEDs are provided on each carrier. 

 

550W 1+1 redundant, hot-swappable, auto-selecting power supply using two standard EIC 
Adapter plugs. One of the two supplies must be operational for the server to receive adequate 
power. 

 

Innovative thermal design utilizing four hot-swappable system fans. The system design assures a 
uniform and adequate flow of cooling air to be drawn over the entire motherboard, hard drive, 
memory and CPU area at all times. 

 

Front I/O panel, providing LCD display, CD-ROM, power on/off button; power, hard drive activity 
and management/fault LEDs; an RJ45 serial remote management port. 

 

Rear I/O panel, providing motherboard I/O ports for keyboard, mouse, video, Ethernet, USB, and 
serial connectivity. 

 

Optional floppy drive accessible at the rear of the system. 

1.2 Server 

Components 

In addition to the Rackable Systems S3118 chassis, the server contains a variety of hardware 
components, including: 

 

One (1) server-class motherboard 

 

Two (2) Intel Xeon EM64T, Two (2) AMD Opteron, or one (1) Intel Pentium 4 processor 

 

Up to 4-32 GB Registered ECC main memory (maximum memory is motherboard dependant) 

 

Up to Eighteen (18) Serial ATA (SATA) or U320 SCSI hard drives 

 

Up to Two (2) SATA RAID cards (by Adaptec or 3Ware) or up to Two (2) U320 SCSI RAID cards 
(by Adaptec or LSI Logic) 

 

One (1) Rackable Systems S3118 manual 

The following additional options are available: 

 

One (1) slim CD-ROM drive 

 

One (1) Floppy drive 

 

One (1) Remote management card and LCD 

 

Up to Two (2) additional PCI cards (e.g. additional networking cards) 

S3118-Manual-1.0.1 

June 30, 2005 

Page 3 of 15 

 

Summary of Contents for S3118
















Reviews: