TIP! SAVE TIME AND HASSLE. PLEASE READ ENTIRE INSTRUCTIONS BEFORE BEGINNING ASSEMBLY.
PAINTABLE -
Want a different color? The finish on this pot rack can be spray painted any color. We
recommend Rustoleum “Hammered” colors for their metal-like finishes, however any quality spray-can paint may be
used. See a paint retailer for guidance
TOOLS NEEDED -
Hex wrench, fastener hardware (nuts, bolts) are provided
.
STEP 1: LAYOUT PARTS
On a table lay out all parts as shown in the exploded view above.
STEP 2: CONNECT MAIN BODY PARTS
Temporarily connect two oval ends (4A) and two side bars (3A) by inserting a barrel nut and bolt (28A, 28B) through the
top hole at each of four corners. This will cause body of pot rack to stand on edge. Be certain side bars (3A)
are on the
INSIDE when connected.
TIP!
It is easiest to attach the pot rack parts when you insert the barrel nut (28B) from the INSIDE of the pot rack body,
then screw the barrel bolt (28A) into NUT from the OUTSIDE.
How to Assemble Your Pot Rack
Item No.
Description
Qty.
Item No
Description
Qty.
3A
Side bar 22” 4 thru holes
2
28B
Barrel nut
11
4A
Oval end
2
19A
1/4” Bolt hook - 4”
2
5
Hang tab
2
0
Installation hardware
6
Curved arm
4
15
S-hook
2
25A
Pot hook straight
6
20
Wood Screw Hook - 4”
2
25B
Pot hook angled
6
26A
Hex wrench
2
28A
Barrel Bolt
11
27A
Toggle
2
MISSING A PART?
Please call our TOLL FREE
SERVICE CENTER
1 (877) 362-5863
TIP!
FIRST, REMOVE PAINT FROM BOLT HOLES. Because the powder coat finish applied at the fac-
tory also adheres to the inside of bolt holes, pushing a bolt through it during assembly may be difficult.
Therefore, before connecting parts, we recommend that you check to see that bolts slip easily through all
holes. If they do not, carefully clear paint from holes in side bars, ends and arms using a small knife.
SECOND, be certain that barrel nuts and bolts screw together easily BEFORE beginning assembly. Resi-
due from the black finish may cause some bolts to stick a bit, therefore use the two hex wrenches enclosed
(one for each end of the barrel) and screw them together to clear away extra paint.
