5
•
Regularly check that the bolts, nuts and screws are properly tightened for safe use of the
mower.
•
Do not use the tool where there is a risk of lighting.
•
Avoid operating the lawnmower in slopes and near drop-offs, ditches or embankments. If
it is really needed to use the tool on these locations, take an extreme precaution and stay
in alert. Do not take any risk.
•
Before and after use, check that all functions, protections, parts, work properly and that
they are not damaged. Bring maintenance and regular checking to the tool. In case of
damage or malfunction, do not use the tool and take it to a service agent for inspection
and repair.
•
Safety systems or features of the lawnmower shall not be tampered with or disabled.
•
The operator should not alter or tamper with any sealed adjustments for the engine speed
control.
•
Wear protective equipment including at least a hearing protection, eyes protection,
helmet, gloves, antiskid shoes, respiratory protection and protective clothes.
•
Caution: the lawnmower shall not be operated without either the entire grass catcher or
self-closing discharge opening guard in place.
•
To avoid a long exposition to noise and vibration which can affect the health, limit the
duration of operation, and take enough rest during two operations.
•
Warning: the tool emit exhaust gases; Do not expose yourself and people to these gas
since they are dangerous for health.
•
The blade stopping devices must always work. If the blade does not stop after stopping
the machine and the devices are damaged, the machine should be taken to a qualified
service for inspection.
•
Warning: there is danger about moving blade assemblies; handle only blades when the
machine switched off and blade completely stopped. Wear protective gloves.
Fuel Handling
Use caution when handling fuels. They are flammable and the vapors are explosive.
Use only an approved container.
Never remove the fuel cap or add fuel while the machine is on. Turn off the unit and allow the
engine and exhaust components to cool down before refueling.
Do not smoke.
Never refuel inside a room.
Never store the tool and the fuel tank indoors where there is a naked flame, such as near a
water heater.
If fuel has spilled, do not attempt to start the machine, but move it away from the spill before
starting to use it. Please clean up any spills.
Replace and tighten the fuel tank cap after refueling.
Follow strictly the instructions in this manual for filling the tool with fuel.
During maintenance and storage
Switch off the tool and wait until it stops completely. Make sure that all moving parts are
stopped.
Allow the machine to cool before performing inspection, adjustments, maintenance, servicing
and storage.
Store the tool where fuel vapor will not reach a flame or spark.
When transporting and storing the tool, always use a protection device to avoid fuel spillage,
accidents and injuries.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of
injury and damage remain. The following hazards may arise in the structure and design of this
product:
Always be vigilant when using this product, so you can recognize and manage the risks
rather.
There are adverse health consequences resulting from the emission of vibration if the product
is used for long periods of time or not properly managed and properly maintained.
There are risks of injury and property damage due to attachments or broken the sudden
Summary of Contents for RACTDT5070-A
Page 16: ...16 ...
