background image

13 

 

6.  MAINTENANCE AND STORAGE 

 
Before  working  on  the  cutting  system  of  the  machine,  switch  off  the  engine  and 
remove the spark plug’s cap. 
 
a.  Cleaning the mower 

Cut grass is damp. Regular cleaning after each use will ensure  better functioning of 
the mower and reduce the risk of corrosion or seizure. 

Having  finished  mowing,  allow  the  engine  to  cool  then  remove  accumulated  grass 
clippings from and around the engine with a brush. 

Clean the grass collection bag annually with a brush or gentle spray of water.

 

Disconnect the spark plug’s cap and tilt the mower on its side with the air filter and 
carburettor uppermost.

 

Remove any remaining cut grass from the cutting system with a scraper and a brush.

 

Reposition the mower onto its four wheels.

 

Do not use a pressure washer or hot water to clean the mower. Be careful to avoid 
soaking parts such as the engine, air cleaner, wheel bearings and metal fastenings. 
Dry off the machine before storing by leaving  it running for a few minutes on a  flat, 
clear surface to prevent corrosion or seizure.

 

 
b.  Blade maintenance 

WARNING: Wear gloves, turn off the engine and remove the spark plug before 
proceeding. 
 

 

 

The  blade  is  made  of  hardened  steel.  To  get  a  clean  job,  sharpen  the  blade  frequently, 
about  every  25  hours  of  use.  Make  sure  the  blade  is  always  well  balanced. 
Insert a small iron pin (2 or 3 mm in diameter) into the hole in the middle of the blade: it 
must remain horizontal. If the blade does not stay  horizontal, balance it by  sharpening it 
further on the side where it is leaning. 
WARNING:  Use  only  original  spare  parts.  Poor  quality  replacement  parts  can  cause 
serious damage to your mower and affect your safety. 

 

  

1

 
 

To remove the blade, loosen the screw, check the blade bracket, and replace all parts if 
they are worn or damaged. 
When reassembling the blade, make sure that the cutting edges are in the same direction 
as the direction of rotation of the motor. The tightening torque of the blade screw should 
be 3.7 kg * m / s 2 (37 Nm) and can be checked with a torque wrench.

 

 
c.  Storing the mower 

Summary of Contents for RACTDT5070-A


















Reviews: