background image

ORIGINAL INSTRUCTIONS

4. SYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal injury
or damage to the tool.

In accordance with essential
requirements of the European
directive(s)

Wear eye protection

Wear gloves

Read manual before use

Double insulation
(Only for charger)

Max temperature

Recycle

Do not put the battery in water

Do not put the battery on fire

5. GENERAL POWER TOOL SAFETY WARNINGS

General power tool safety warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury

.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.

1) Work area safety

a)

Keep work area clean and well lit

.

Cluttered or dark areas invite accidents.

b)

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases

or dust.

Power tools create sparks which may ignite the dust or fumes.

c)

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a)

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b)

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c)

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

d)

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e)

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable

for outdoor use reduces the risk of electric shock.

05

Summary of Contents for RACPV18L-37-1

















Reviews: