Racing RACFBE65T, User Manual

Page: 14 / 19

7. TRANSPORT
The log splitter is equipped with two wheels for easy transport.
Remove the tray table beforehand. (see 9.5)
The machine can be transported on the wheels at an angle. Use the transport handle, lift and pull
or push.
8. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw
materials in this packaging can be reused or recycled. The equipment and its accessories are
made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or your local council.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic
waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic
equipment (WEEE). This product must be disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised collecting point for the recycling of waste
electrical and electronic equipment. Improper handling of waste equipment may have negative
consequences for the environment and human health due to potentially hazardous substances
that are often contained in electrical and electronic equipment.
By properly disposing of this product, you are also contributing to the effective use of natural
resources. You can obtain information on collection points for waste equipment from your
municipal administration, public waste disposal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your waste disposal company.
9. TROUBLESHOOTING
The table below contains a list of error symptoms and explains what you can do to solve the
problem if your tool fails to work properly. If the problem persists after working through the list,
please contact your nearest service workshop.
Problem Possible Cause Remedy
Motor stops starting Overload protection device disengaged
to protect the log splitter from being
damaged Contact a qualified Electrician.
Fails to split logs Log is improperly positioned
Refer to ”operation” section to
perfect log loading
Size of log exceeds the capacity of the
machine Reduce log size before operating
Wedge cutting edge is blunt Sharpen cutting edge
Oil leaks Locate leak(s) and contact your
dealer
Log pusher moves
jerkily, taking unfamiliar
noise or vibrating a lot Lack of hydraulic oil and excessive air
in the hydraulic system
Check oil level for possible
refilling. Contact your dealer
Oil leaks around the
cylinder ram or from
other points Air sealed in hydraulic system while
operating Loosen bleed screw by some
rotations before operating the log
splitter
Bleed screw is not tightened before
moving the log splitter Tighten bleed screw up before
moving the log splitter
Oil drain screw loose Tighten the oil drain screw firmly
Hydraulic control valve assembly and/or
seal worn
Contact your dealer
14