ORIGINAL INSTRUCTIONS
16
leverage which could cause the blade to bind or crack.
Scything weeds
This is cutting by swinging the blade in a level arc. It can quickly clear areas of field grass and weeds. Scything
should not be used to cut large, tough weeds or woody growths.
Scything can be done in both directions, or just in one way which results in the debris being thrown away from
you.
That is using the side of the blade that it is rotating away from you. Tilt down the blade slightly on this same
side. You will be hit by some debris if you scythe in both directions.
Cut only with the side of the blade that the debris is moving away from you.
If kickback occurs, the blade may be dull, or the material so thick and hard that you should use other tool
instead of this machine.
Do not force the blade to cut. Do not change the angle of cut after into the wood. Avoid using any pressure or
leverage which could cause the blade to bind or crack.
6. MAINTENANCE & CARE
Before any maintenance work, the machine must be switched off and completely cooled.
Maintenance shall be provided regularly and must be done according to the instructions provided in
this instruction manual. A clean, well-maintained machine increases its lifetime and efficiency.
Improper maintenance can cause damage, accidents and render the tool inoperable in the short
term.
Any other maintenance, modification or repair must be carried out by a qualified professional.
Do not immerse the tool in water or any other liquid.
a. Air filter
Check the air filter as often as necessary to maintain in a clean condition. Light surface dust can readily be
removed by tapping the filter. Heavy deposits should be washed out in suitable solvent. To clean the filter, remove
filter cover by loosening air filter cover knob.
