background image

 

 

  Do not place hands or feet near or under rotating parts. Keep clean the mouth of the grass extractor. 

  Never take or carry the mower while the machine is running. 

  Stop the machine and remove the ignition key, disconnect the spark plug from the spark plug: 

o

  Before cleaning or unclogging the grass extractor. 

o

  Before checking, cleaning, and working on the mower. 

o

  After hitting an object. Inspect the mower for damage and repair before re-using the mower. 

o

  If  the  mower  begins  to  vibrate  abnormally,  stop  the  engine  immediately  and  check  according  to 

previous recommendations. 

  The  controls  must  be  always  checked  if  they  are  functioning  correctly.  In  case  of  malfunction,  do  not 

use the tool and bring to a service agent for inspection.  

  Stop the engine immediately: 

o

  Every time you leave the craft. 

o

  Before refueling. 

  When the tool is stopped, park it in a safe place.  

  Move slowly when moving. 

  The lawnmower  should not be used in slopes and near  drop-offs, ditches or  embankments; if the tool 

must  be  used  in  these  kinds  of  emplacements,  take  an  extreme  precaution  and  operate  carefully  the 
tool.  

  The lawnmower safety systems or features shall not be tampered with or disabled; 

  The operator should not alter or tamper with any sealed adjustments for the engine speed control. 

 

Maintenance and storage 

  Check, check and tighten all bolts, bolts, and screws to ensure that the equipment is in safe operating 

condition. 

  Never  keep  the  mower  with  gasoline  in  the  tank  in  a  building  or  vapors  can  cause  a  bright  flame  or 

spark. 

  Allow the machine to cool before storing it in an enclosed area. 

  To  reduce  the  risk  of  fire,  keep  the  machine  clean  without  grass,  without  grease,  the  muffler  and  the 

engine cools, disconnect the battery if necessary and empty the fuel tank 

  Check the grass catcher frequently, its condition or deterioration. 

  Replace worn and damaged parts for safety. 

  If the fuel tank is to be drained, it must be made outdoors. 

 

Special safety instructions 

  In  case  of  lack  of  knowledge  or  first  use  of  this  product,  we  recommend  that  you  have  a  formation/ 

training with a professional or an experienced person. 

  Always use the mower with its pick-up bag and / or deflector in the intended position.

 

  Switch off the engine before emptying the pick-up bag or before changing the cutting height.

 

  While the engine is running, never put your hands or feet under the mower or under the grass ejection 

area.

 

  Before mowing, remove all foreign objects (such as stones, toys, sticks and wires) from the grass that 

can be propelled by the machine.

 

  Keep children and pets at a safe distance while using the mower.

 

  Never lift the mower when the engine starts.

 

  Alcohol, drug, as well as illness, fever and fatigue affect your ability to respond. Do not use this tool in 

such circumstances.

 

  Never change the rated speed of the motor.

 

  Never lift or carry the tool while the engine is running.

 

  Before mowing, install the collection bag in its intended position.

 

  Do not use the mower in the event of rain or when the grass is wet.

 

  Never lift the rear of the mower when starting the engine and never place your hands or feet under the 

mower deck or in the rear ejection port while the engine is running.

 

  Turn off the engine and remove the spark plug cap in the following cases:

 

o

  Before operating under the mower deck or near the ejection opening.

 

o

  Before any maintenance, repair or verification.

 

o

  Before transporting, lifting or storing the mower.

 

o

  If you leave the mower unattended or change the cutting height.

 

o

  To remove and empty the collection bag.

 

4

Summary of Contents for RAC5174F























Reviews: