background image

 

1. SAFETY INSTRUCTIONS 

 

Instructions 

  Read the instructions carefully. Be familiar with the controls and proper use of the equipment.

 

  Never allow children to use this mower. If the mower is given to an other people, also give this manual. 

Also make sure that this person uses this device only after receiving the necessary instructions. Local 
laws may restrict the age of the user.

 

  Never mow while people, especially children, or animals are nearby.

 

  Keep  in  mind  that  the  operator  or  user  is  responsible  for  accidents  or  risks  that  may  occur  to  other 

persons or their properties.

 

  If necessary, have training with an experienced person in order to use in a safe way this tool.  

 

Preparation 

  During  mowing,  always  wear  safety  shoes  and  long  pants.  Do  not  use  the  equipment  barefoot  or 

wearing sandals open.

 

  Wear personal protective equipment including at least: clothes of protection, gloves,  slip-resistant foot 

protection, mask, ocular and hearing protection

 

  Carefully inspect the area where equipment is being used by removing all objects that may be affected 

by the machine.

 

  WARNING - Gasoline is extremely flammable.

 

o

  Add fuel before starting. Do not remove the fuel tank cap while the machine is running or when it is 

hot.

 

o

  If  the  fuel  has  spilled  or  leaked,  do  not  attempt  to  start  the  machine  but  move  the  machine  away 

from  the  leakage  area  and  avoid  creating  a  source  of  ignition  until  the  gasoline  vapors  has 
dissipated.

 

o

  Refuel only outside and do not smoke during refueling.

 

o

  Store fuel in tanks specifically designated for this purpose.

 

o

  Replace the fuel tank or the defective gasoline plug securely.

 

  Replace defective mufflers. 

  Before  use,  always  inspect  visually  that  the  blades,  blade  assembly  and  blade  lock  are  not  worn  or 

damaged.  Replace  blades  and  blade  assemblies  that  are  not  in  good  condition  to  maintain  balance. 
Contact  the  manufacturer  or  your  dealer  in  order  to  have  a  list  of  recommended  blades.  Non-
recommended blades can give a risk of malfunctions, injuries and accidents.

  

  The blades must be balanced to ensure proper operation and to be able to work safely. 

 

Operation 

  Do not use the machine in a confined space or hazardous carbon monoxide emissions can be collected. 

  Mow only under daylight or under good artificial light. Good visibility must always be ensured. 

  Avoid using the equipment on greasy grass, where possible. 

  Always be sure of your walking on the slopes. 

  Walk, never run. 

  For lawn mowers, mow across slopes, never from top to bottom. 

  Exercise extreme caution when changing direction on slopes. 

  Stop the  blades  if  the mower  is  to  be tilted  during  transport  when  crossing  surfaces  other than grass, 

and when transporting the mower due to the area to be mowed. 

  Do not mow on steep slopes. 

  Use extreme caution when tipping or pulling the mower towards you. 

  Never use the mower with defective guards, or without safety devices such as baffles and or collection 

bins, which are not in place. 

  Do not change the motor configuration or increase the speed. 

  For  starting,  disengage  all  blades,  the  gears  must  be  in  neutral,  the  traction  control  lever  must  be 

released. Set foot well away from the blades. 

  Before starting the engine or starting the engine, carefully read and understand all instructions. 

  Do not tilt the mower when starting the machine or turn on the engine, unless the mower needs to be 

tilted for starting. In this case, do not tilt it more than necessary and lift only the part that is furthest away 
from the user. 

  Do not start the machine by standing in front of the ejection. 

3

Summary of Contents for RAC5174F























Reviews: