background image

 

 

3

 

Use extreme caution when tipping or pulling the mower towards you. 

 

Never use the mower with defective guards, or without safety devices such as baffles and 

or collection bins, which are not in place. 

 

Do not change the motor configuration or increase the speed. 

 

For starting, disengage all blades, the gears must be in neutral, the traction control lever 

must be released. Set foot well away from the blades. 

  Before starting the engine or starting the engine, carefully read and understand all 

instructions. 

 

Do not tilt the mower when starting the machine or turn on the engine, unless the mower 

needs to be tilted for starting. In this case, do not tilt it more than absolutely necessary and 

lift only the part that is furthest away from the user. 

 

Do not start the machine by standing in front of the ejection 

 

Do not place hands or feet near or under rotating parts. Keep clean the mouth of the grass 

extractor. 

 

Never take or carry the mower while the machine is running. 

 

Stop the machine and remove the ignition key, disconnect the spark plug from the spark 

plug: 

o

  Before cleaning or unclogging the grass extractor. 

o

  Before checking, cleaning, and working on the mower. 

o

  After hitting an object. Inspect the mower for damage and repair before re-using the 

mower. 

o

  If the mower begins to vibrate abnormally, stop the engine immediately and check 

according to previous recommendations. 

 

Stop the engine immediately: 

o

  Every time you leave the craft. 

o

 Before 

refuelling. 

 

To stop the engine, reduce the throttle setting, turn off the ignition and release the operator 

presence grip, close the fuel cock (depending on the equipment). 

 

Move slowly when moving. 

 

Maintenance and storage 

  Check, and tighten all bolts, bolts, and screws to ensure that the equipment is in safe 

operating condition. 

 

Never keep the mower with gasoline in the tank in a building or vapours can cause a bright 

flame or spark. 

 

Allow the machine to cool before storing it in an enclosed area. 

  To reduce the risk of fire, keep the machine clean without grass, without grease, the 

muffler and the engine cools, disconnect the battery if necessary and empty the fuel tank 

 

Check the grass catcher frequently, its condition or deterioration. 

 

Replace worn and damaged parts for safety. 

 

If the fuel tank is to be drained, it must be made outdoors. 

 

Special safety instructions 

 

In case of lack of knowledge or first use of this product, we recommend that you have a 

Summary of Contents for RAC4000T-A3































Reviews: