5
This product is intended for private domestic use only. Do not use it for commercial purposes.
Never let people unfamiliar with these instructions or children use this product.
National regulations may limit the use of the machine.
People under the age of 18 must not use this product
Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property.
Do not use the tool if you are drunk, tired, under the influence of drugs or ill. Do not use the tool if you are not in
an adequate physical condition.
This tool is intended for outdoor use. Never use it indoors.
When transporting the machine:
o
Secure the machine during transport to prevent, damage or injury.
o
Use a carrying case to protect the cutter during transport.
Keep people and animals away from the work area. Children and people who do not know how to use this tool
should not touch it and handle it.
Keep them at least 15 m from the machine during operation,
Use the product only under daylight or under good artificial light.
When using the machine, always wear full protective equipment including a helmet, protective mask, ear
protection, gloves, non-slip footwear and protective clothing.
Wear appropriate clothing. Do not wear loose or unbuttoned shirts. Do not wear jewellery that may come in
contact with moving parts. If you have long hair, tie it down and wear an appropriate safety helmet.
Do not operate the product with damaged guards or shields in place.
Keep hands and feet of the appliance at all times and especially when turning the appliance off and on.
Do not use the tool in an area where ventilation is poor. Gas emissions can cause injury.
Do not work when it rains and in bad weather. Do not use the tool in damp locations.
Do not use the tool in the presence of flammable liquids or gases.
Caution: The machine releases gases when it is used. Avoid coming into contact with these gases.
Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could
cause accidents.
Do not force the tool.
Use only the accessories supplied or recommended by the manufacturer. Use of other accessories may result in
an accident. Read the "Technical Data" section of this instruction manual or ask your dealer for advice.
Do not lean. Keep a good seating/footing and balance at all times.
To maintain tools and accessories carefully, keep cutting tools sharp and clean for better and safer performance.
Follow the instructions in this manual to lubricate and change accessories.
Always inspect the machine before and after operation. If the tool is damaged or faulty, stop using the tool and
bring it to an authorized service for inspection and repair.
Turn off the tool after use, when you leave it unattended, when changing these accessories and before servicing.
Keep handles dry, clean and free from oil and grease.
Be concentrated when using the tool. Look at what you do, use good sense and do not use the tool when you are
tired.
Remove the blade guard before using the tool.
A damaged guard or other part must be properly repaired or replaced by an authorized service center, unless
otherwise specified in this instruction manual.
Do not use the tool if the starter is not working (if it cannot be turned ON and OFF).
Place the equipment in a well-lit area on a flat, stable, dry and well-ventilated surface, away from flammable
materials and with plenty of space for sparking and sharpen waste.
Do not allow anyone, especially children, to come within a radius of at least five meters around the work area
when all work is in progress.
Immediately stop the tool in the event of a malfunction of the motor or the ON/OFF button or in case of unusual
noise.
Do not use the tool if the starter is damaged.
Do not move the chain with your hand with the wheel moving.
Do not stop the chain with your hands or other objects.
Treat the chain teeth with caution during operation; they can cause severe cuts.
When not in use, the machine must be stored in a dry, locked place out of the reach of children.
Before using the product and after any shock, please check it for signs of wear or damage. Please carry out
repairs if necessary.
Always switch off the machine:
o
Every time you leave the device unattended;
o
Before releasing an obstruction;
o
Before checking, cleaning or working on the product;
o
After hitting a foreign object;
o
Every time the product starts to vibrate abnormally.
