10
a. Assembly of the chain guide
IMPORTANT: The machine must not be started during assembly. Wear protective gloves when handling
the blade.
Your chain saw is supplied one SDS system for assemble and adjust quickly for chain tension. The outside
ring (part 1) adjusts the tension of the chain and the inner screw adjusts the tension of the bar. Turn the
inner screw (part 2) of the SDS counter-clockwise to open the chain over. (See Fig.3)
1). Unpack all parts carefully.
2). Place the chain saw on any suitable flat surface.
3). Spread the saw chain out with the cutting edges (A) of the chain pointing in the direction of rotating. Slide the saw
chain into the slot around the chain bar. Ensure chain is in correct running direction.
(See Fig.4a, 4b)
4). Fit the chain bar onto the drive sprocket (11) and fastening bolt, and assemble safety guard. (See Fig. 5)
5) The chain is not yet tensioned now. Tensioning the chain applies as described under “Tensioning chain”. After
running the chain saw around 1 hour, adjust the chain tension to 2mm by applying 9N of torque
4. OPERATION
