Racing RAC1050ET-1, Original Instruction

Page: 32 / 33

31
Parts list
Pos. Description Pos. Description
1 Ventilator cover 23 Tine set left
2 Motor housing 24 Tine set right
3 Motor complete 25 Handle complete with cable
4 Protective shield 26 Guide bar bracket
5 Deck 27 Screw M6x45
6 Exhaust cover 28 Cable clip
7 Exhaust back cover 29 Guide bar middle section
8 Coupler 30 Swing nut M6
9 Flexible shaft 31 Screw ST4.2x30
10 Rubber seal 32 Guide bar lower section
11 Bearing 6200Z 33 Handle complete
12 Worm shaft 34 Guide bar holder
13 Bearing 608Z 35
14 Tine shaft 36 Cable sleeve
15 Bush 37 Cable holder
16 Transmission case 38 Inductance coil
17 Drain screw plug 39 Foam filter
18 Screw M6x16 40 Screw M8x40 with nut
19 Washer 41 Screw ST3.9x19
20 O-ring 42 Screw M5x48, motor
21 Rubber seal 43 Screw M5x15 with nut
22 Dustproof ring 44 Screw ST4.2x19