910500
– 4-Cycle Gas Power
Impact Wrench
Impact
Phone: (262) 637-9681
Email:
5.2022 Rev 1
Page
9
of
27
Fuel Safety
Petrol is highly flammable and must be handled and stored carefully. Use a container approved for fuel
for storing petrol and/or fuel/oil mixture.
Use an approved container for fuel.
Do not smoke or allow smoking near fuel or the tool or while using the tool.
When filling up with fuel, stop the engine and make sure the engine is cool and choose places where
there are no flammables and there is well ventilation.
Never open the fuel tank cap immediately after stopping the engine.
When removing the fuel tank cap, gasoline may blow out, so loosen it carefully.
Do not overfill the fuel tank. Stop filling 10mm from the top of the tank.
Tighten the fuel cap securely after refueling.
Mix and pour fuel outdoors where there is no sparks or flames.
Wipe up all fuel spills before starting the engine.
Move at least 3-feet / 3-meters away from the fueling site before starting the engine.
Drain the tank and run the engine dry before storing the machine.
It is recommended that the fuel be
emptied after each use. If fuel is left in the tank, store the tool so fuel will not leak.
Store tool fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric
motors or switches, furnaces, etc.
Transport and Storage
Carry the tool by hand with the engine stopped and the muffler away from your body.
Allow the engine to cool, empty the fuel tank, and secure the tool before storing or transporting in a
vehicle.
Store the tool out of the reach of children.
Clean the unit carefully and store It in a dry place.
Make sure the engine switch is off when transporting or storing.
