VBOX Micro
Logged Channels
The following channels are non-selectable (always logged):
•
Satellite count.
•
UTC time (ms since midnight).
•
Latitude (0000.00000 minutes decimal minutes).
•
Longitude (00000.00000 minutes decimal minutes).
•
Speed (000.000km/h).
•
Heading (000.00°).
•
Height (0000.00m).
•
Vertical velocity (0000.00km/h).
•
Longitudinal Acceleration (0000.00G, smoothed over 4 samples).
•
Lateral Acceleration (0000.00G, smoothed over 4 samples).
•
Distance from power on (0000000.00m).
•
Accumulated distance (permanent) (0000000.00m).
•
Date from GPS (ddmmyy).
Logged File Format
VBOX Micro files are saved in a standard
space delimited text format. This allows the
data to easily be imported into third party
applications such as word processors or
spreadsheets. Each file contains a header
section before the main data that describes
the channel content and information about
the VBOX Micro, such as serial number and
firmware version.
The [column names] section specifies the
data in each column of the data section.
An example of a VBOX .VBO file is shown
on the right.
Note that the “File created” time and date is
derived from GPS UTC time and date, so will
not reflect your local time unless this has
been set within the VBOX Micro setup
software.
File created on 08/07/2008 @ 11:18
[header]
satellites
time
latitude
longitude
velocity kmh
heading
height
Vertical velocity kmh
Long accel g
Lat accel g
POR Distance m
Distance m
Date
[channel units]
[comments]
VBMicro V01.00 Bld. 0011
Serial Number : 00006999
[module Information]
[column names]
sats time lat long velocity heading height vert-vel Longacc Latacc POR_Distance Distance Date
[data]
008 111825.20 +3119.371150 -00059.479950 000.000 013.36 +0162.82 +0000.24 +0000.00 +0000.00 0000000.00 0000000.00 080708
008 111825.30 +3119.371150 -00059.479950 000.000 013.37 +0162.83 +0000.23 +0000.00 +0000.00 0000000.00 0000000.00 080708
Page 10 of 29
