By selecting
New,
or a previously saved configuration file, you are then presented with options necessary for correct
VIPS operation.
Site Settings
The first page the user is presented with is the
Site Settings
tab. Here you can configure how the Rover is expected to
operate and also change the Radio Settings.
Note: The radio settings are for Racelogic development purposes only.
Identifier
There may be multiple VBOX IPS operating within the same test ground and so to ensure the rover only uses the
signals coming from the intended test site, a site identifier needs to be entered. This identifier will need to match the site
identifier of the beacons that will be used.
For temporary installations, this identifier should be set to 0. For permanent installations a non-zero number should be
used.
https://racelogic.support/01VBOX_Automotive/VBOX_Indoor_Positioning_System/VBOX_IPS_User_Guide/
12
