Accel Parameters
Code
Name
Units
VT
Maximum speed
km/h or mph
AT
** Acceleration time
s
DA
Acceleration distance
m or ft
OV
Velocity at target distance
km/h or mph
OT
Time to target distance
s
**To set up the start and end speed for the acceleration / deceleration tests enter the CONFIG DISPLAY MENU from
screens 1, 2 or 3, scroll across until the screen displays ACCEL/DECEL SETUP press OK to enter the test set-up menu.
CAN Parameters
The first 32 CAN channels currently being logged by the VBOX are selectable here. If no channels are currently being
logged then you will be unable to enter this submenu. Note: - To allow the MFD to read the available CAN channels it
must be connected up to a VBOX and VBOX Setup entered. Failure to do so will result in this list being blank or
incomplete.
Kalman Filter Status
The table below shows the hex and decimal numbers associated with Kalman filter status. The VBOX can have a
number of these status flags active at the same time so the resultant number shown in VBOX Tools or a logged file will
be a result of adding together the numbers of the active statuses shown below.
Kalman Filter Status
Hex
Decimal
kf_Clear
0x0000
0
kf_NEWIMUVersion
0x0001
1
kf_TestMode
0x0002
2
kf_Use
0x0004
4
kf_Initialised
0x0008
8
kf_IMUDataFound
0x0010
16
https://racelogic.support/01VBOX_Automotive/06Displays/Multi-Function_Display_(MFD)/
21
