4
Now have a look at the next diagram where all the laser cut parts are shown and
numbered from
A
to
L
and try to identify which is which and where they fit in.
The structure consists of two sides (
A 1-2
) that support the floor (
B
) and which is
connected higher up by a ring beam (
C
). This structure is supported by a column
made up of four sides (
E 1-2
) and (
F 1-2
) that stands on the base foundation (
D
).
The viewing platform is safeguarded by two railings (
G 1-2
) and is reached with a
ladder made up of two legs (
H 1-2
) and 13 steps (
J 1-13
) On the two sides of the
platform are four advertising boards (
K 1-2
) and (
L 1-2
).
PREPARING THE CUT PIECES
Firstly, remove all the laser cut parts from the sheets. The sheets can be discarded.
Clean the edges of the parts if there are any tiny bits where the parts were fixed to
the sheets. This can be done with your knife or even your thumb nail.
