The main structure consists of four walls, the front wall (
B
), the rear wall (
C
), and two
side walls (
D
) and (
E
), All the walls fit into the floor (
A
). There is a single roof panel
(
F
).
There are two door frames (
H 1-2
) that also include a window frame above the doors
and two wooden door shutters. The shutters are further detailed with the four shutter
beams (
K 1-4
). The windows on the side walls also have frames (
J 1-2
). Above the
front doors is a billboard (
G
) where the artwork can be fixed.
PREPARING THE CUT PIECES
Firstly, remove all the laser cut parts from the sheets. The sheets can be discarded.
Clean the edges of the parts if there are any tiny bits where the parts were fixed to
the sheets. This can be done with your knife or even your thumb nail.
We recommend that you start by sanding your finished product with a very light
sandpaper to ensure a smooth finish for the end product.
