Race Technology DASH4PRO, Instruction Manual, Page: 44 / 51

44
13.4 Sending Configuration to the DASH4PRO
Once all the configuration information has been entered into the configuration software
then this information has to be transferred to the DASH4PRO unit. This can be done in
one of 2 ways: -
13.4.1 Using the Data Logger: -
If the DASH4PRO is connected to the Data Logger then: -
1. Click on the File -> Save configuration file menu item to save the configuration
settings to a disk file. File name must be “DASH.HEX” (All capital letters including
the file extension). If the DASH4PRO is connected to a DL1 MK3 then the .cmg file
format can be used. This enables the DASH4PRO to be reprogrammed when
connected in a system with multiple items without having to be disconnected and
connected directly to the Data Logger.
2. Copy the file to the root directory of an empty, formatted, compact flash card.
3. Turn on the display and the logger.
4. Insert the compact flash card with the "DASH.HEX" file in to the Data Logger.
5. Once the card is inserted then the information will be automatically read and
transferred and the display configured. While transferring DASH4PRO‟s backlight
will be turned off and gives a message
Programming….
When configuration is successful the device will display the message Configuration
Success on screen. When process is completed, backlight will be turned on again and it
comes to normal display mode.
Note that the display will remember its configuration - there is no need to repeat the
operation every time the display is used. This is only necessary when making changes to
the configuration settings.
13.4.2 By connecting DASH4PRO to a PC
Note: You will require a special connector to connect the DASH4PRO to the PC (not
shipped with the DASH4PRO). For more information please contact Race Technology.
Connect the DASH4PRO unit to a COM port on your computer. Ensure that you switch
off the device whilst connecting. Connection is made using the adapter supplied by
Race Technology on request (if you haven‟t got the adapter, please contact Race
Technology sales).
1. Turn on the display and check whether it is operating.
2. When you are ready, click on the File ->Send Configuration to Device menu item
or toolbar button with the similar functionality. The “Send Configuration to Device”
dialogue box will be opened.