Race Technology DASH4PRO, Instruction Manual, Page: 20 / 51

20
8 Configuring Shift lights on DASH4PRO
There are six lights on each side of the DASH4PRO, either side of the display. These
can be configured to be either red or green lights and can take one of the following
functions depending on the configuration: -
8.1 Shift lights
Based on the engine speed, the lights can be illuminated in a number of ways. If
required, different RPM can be used in each gear and an alternative set of conditions
can be set for low temperature operation based on the value of a second variable. This is
particularly useful to keep engine speed down until the engine is properly warmed up.
8.2 Performance indicator
This mode shows the current time slip rate as either a bar chart from bottom to top, or as
an indicator from the centre outwards. It requires data from a DL1 MK3 or VIDEO4 to
operate in this mode.
8.3 Bar chart based on variable
Either bottom to top or centre out display of any chosen variable, with user configurable
levels at which the LEDs are illuminated.
There are separate configuration sections for the left and right lights.
8.4 Changing the shift light brightness (2.1 LED Brightness)
The brightness of the shift lights can be changed to suit personal preference.
1. Navigate to the menu item 2.1 LED Brightness and press SELECT. The shift lights
will then be illuminated at the current brightness setting.
2. Use the UP and DOWN buttons to move the on screen slider and adjust the
brightness to the desired level.
3. Press SELECT to save the brightness setting. The DASH4PRO will return back to
the normal display mode.