05
·
RECORDING WITH OBD-II
DIAGNOSTIC DATA
To extend the range of recorded and displayed
data you need to have the RN PLUG and the USB
Bluetooth RN Stick. The RN PLUG can be
purchased for an additional fee.
•
Plug the USB Bluetooth RN Stick into the USB
port in you RN ONE.
•
Plug the
RN
PLUG into the
OBD-II
diagnostic port in your vehicle (it is usually
located in the driver footwell, under the steering
wheel, on the left side).
•
The OBD-II values are gathered from the car while
recording.
•
To verify if your car is compatible with the RN
PLUG, record 2 laps manually, each at least 2
minutes long. Check on the Panel 3 of the
Dashboard if the values are available.
06
·
LAPS HISTORY (LAPS)
Laps page displays all laps in the selected event. Full laps are colored white while the
others are colored grey, except the best laps of each driver which are colored yellow.
