1260-100X User Manual
Getting Started 2-2
Racal Instruments
©
2005
1260-100 1260-100X
w/Option-01T
Figure 2-1, The Front View –Two Carriers Configuration.
Option-01T
Presently, the 1260-100X can be used only as a compatible 1260-
type carrier adjacent to a 1260-100 module with an Option 01-T
card installed, or as one of the several 1260-Series modules in
consecutive slots.
The following rules apply when using the Option-01T controller:
1. Each Adapt-a-Switch or full-size VXI switch module has
its own unique module address.
2. Model 1260-100 assigns module addresses 1 through
12, to its module slot, depending on the position of the
Address Range DIP switch.
3. To be controlled by a single Option-01T, a group of
switch modules and carriers must be installed in a
contiguous group of VXIbus chassis slots and the
Option-01T must be installed in the left-most module in
the group.
