2
）
A warning message comes up asking for your confirmation.
3) If you do not want to proceed with erasing the codes, press the
N
button to exit. A message of
“command cancelled”
will show
up.
4) If you do wish to proceed to erase the codes, then press the
Y
button.
5) If the codes are cleared successfully, an “
ERASE DONE!
”
confirmation followed by one advisory message prompting for
rescanning will show on the display. Press any button to return
to the
Vehicle Diagnosis
Menu.
6) If the codes are not cleared, then an “
ERASE FAILURE!
”
message will appear. Press the
N
button to return to the
Vehicle
Diagnosis
menu.
4.3 Reading Freeze Frame Data
1) To view Freeze Frame Data, use the
UP/DOWN
scroll buttons to
select
Freeze Frame
from the
Vehicle Diagnosis
menu and press
the
Y
button.
22
