Set the Date / Time
To set the correct date and time, press
MENU button
to enter the menu setting,
then press and buttons to select
Date/Time
setting, press
OK
button to
set it, then press and buttons to adjust the value, press
OK
button to
switch to next setting, after finished all the settings, press
OK
button to return
to
menu
setting, press
MENU
button to exit menu setting. To start recording
press
OK
button once.
Mode Selection
The default setting is
Video Mode,
press
MODE
button to switch to
Still Capture
Mode, then press
MODE
button to switch to
Playback
Mode.
Using the Dash Cam
Recording Videos
Before starting to record, please ensure that the Micro SD card (included) is
inserted. If you are using the dash cam for the first time,
please format the
Micro SD card at first
in the dash cam. Please press
OK
button to start
recording, the video recording time in red font changes on the screen.
The recorded files are saved to the Micro SD card. To stop recording, press
OK
button again. With the car charger connected the dash cam will automatically
turn on and start recording when the car engine starts. When the engine stops,
the dash cam will automatically save the last file and turn off.
www.proofcam.com
06
Note -
if your vehicle in car power remains on after the car engine has been
turned off, you may need to remove the power lead, or turn the
RAC 107 off using the power button. This is because if the in car power
remains on, the RAC 107 will not know that the engine has been turned
off.
