G-sensor Collision Recording Protection (Protect Level)
Second, set motion detection recording time in recording menu to select Motion
event Rec 5sec/10sec/30sec;
Third, Long press Up button to enter motion detection mode on video mode, the
motion detection icon appears on the right side of the screen and start count
backwards 10 seconds then standby for detection, it will recording automatically
once the Dash Cam detected any motion in front of lens within 2.5m. The recording
time depends on the Motion event REC time and the default setting is 5 second. The
Dash Cam will start next 5 second recording if any motion detected, press any button
can exist from motion detection mode and the icon will disappear from the screen.
www.proofcam.com
08
When a collision is detected while recording, the current video segment will be protected
automatically and cannot be replaced until it is deleted from the SD card. However, if
there is an incident, and you do not want to risk the segment being overwritten, you should
always push the MENU button to protect the current segment.
Audio On / Off
During recording, press UP button to turn the microphone on and off.
Video Menu Operation
Press Menu button to enter menu setting, press Up / Down button to select sub
menu, then press REC button to enter the setting, press Up / Down button to select
the option, and then press REC button confirm. After finished the setting, press Menu
button third to exit menu setting.
Video Menu Options