v1.0.0
Interfacing with Portal Drum
This is Portal Drum:
1. HIT Input Jack
This input is designed such that it will accept nearly any type of signal while still properly hitting the
kick drum. The only requirement is that the voltage e1V. This jack also has a little trick when
you leave the DynaControl input unplugged. Because we have S&H circuits (and attenuverters) on
every input, you can create a single cable HIT + dynamics input if you vary the gate amplitude of your
HIT signal. VeloGate! Because of this normalisation, be certain to zero out any attenuverters or plug
a dummy cable into the DynaControl jack if you do not want to apply the HIT signal to the CV inputs.
