v1.0.0
●
Fully-featured 3 mode attenuverters on all CV inputs for biploar, unipolar positive, or unipolar
negative knob operation.
●
Dual concentric conductive plastic pots with 100k cycle life and smooth action to increase
feature density with no compromises to ergonomics
●
Low loss, high speed active reverse voltage protection, overcurrent protection, ESD
protection
All Rabid Elephant instruments are professionally hand-crafted products built and designed to
exceptionally high standards of performance, quality, and most importantly: musical sound. Click
here for more details about this commitment.
Our Warmest Thanks To...
●
Absolutely You! We do what we do out of love and the hopes that people create and spread
their own liteness with the world. You are a patron to this cause and to us… Thank You!
●
Yoni. While we’ve only met just a short time ago, we have aligned in deep ways and work in
harmony - keeping each other lite. Meowww!
●
Hannes Pasqualini. A gifted artist with a very positive and thought-provoking style that is
more than welcome here.
Installation
Install the power cable to your power distribution with the correct polarity. Also ensure the
connector on the non-Rabid Elephant side is not shifted/offset incorrectly.
-12V is the side of the
connector with the RED STRIPE!
The red side of the cable go to the ‘STRIPE’ mark of the power
header.
NOTE: We have an
located at the end of the manual which includes a
defining terms used throughout the document.
