Rabbit RabbitCore RCM5400W User Manual Download Page 2 | Manualshive

Page: 2 / 120

Rabbit RabbitCore RCM5400W User Manual Download Page 2

RabbitCore RCM5400W

Rabbit Semiconductor Inc.

www.rabbit.com

RabbitCore RCM5400W OEM User’s Manual

Part Number 019-0169 • 080630–A • Printed in U.S.A.

©2008 Digi International Inc. • All rights reserved.

Digi International reserves the right to make changes and

improvements to its products without providing notice.

Trademarks

Rabbit, RabbitCore, and Dynamic C are registered trademarks of Digi International Inc.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

Rabbit 5000 is a trademark of Digi International Inc.

No part of the contents of this manual may be reproduced or transmitted in any form or by any means
without the express written permission of Digi International.

Permission is granted to make one or more copies as long as the copyright page contained therein is
included. These copies of the manuals may not be let or sold for any reason without the express written
permission of Digi International.

The latest revision of this manual is available on the Rabbit Web site,

,

for free, unregistered download.

«
1
2
3
4
...
»

Summary of Contents for RabbitCore RCM5400W

























































































































Reviews:

No comments