User’s Manual
63
When you refresh the page in your browser, you will see that the page has been restored.
You have successfully updated and restored your application's files remotely!
When you are finished with the
INTEGRATION.C
sample program, you need to follow a
special shutdown procedure before powering off to prevent any possible corruption of the
FAT file system. Press and hold switch S2 on the Prototyping Board until LED DS3 blinks
rapidly to indicate that it is now safe to turn the RCM3305/RCM3315 off. This procedure
can be modified by the user to provide other application-specific shutdown tasks.
6.7 Where Do I Go From Here?
NOTE:
If you purchased your RCM3305/RCM3315 through a distributor or through a
Rabbit partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
•
Check the Rabbit Technical Bulletin Board and forums at
and at
.
•
Use the Technical Support
e-mail form at
www.rabbit.com/support/questionSubmit.shtml
If the sample programs ran fine, you are now ready to go on.
Additional sample programs are described in the
Dynamic C TCP/IP User’s Manual
.
Please refer to the
Dynamic C TCP/IP User’s Manual
to develop your own applications.
An Introduction to TCP/IP
provides background information on TCP/IP, and is available
on the CD and on our
Summary of Contents for RabbitCore RCM3305
