Rabbit Fox LP3500, User Manual, Page: 21 / 143

User’s Manual 15
2.5 PONG.C
You are now ready to test your set-up by running a sample program.
Find the file
PONG.C
, which is in the Dynamic C
SAMPLES
folder. To run the program,
open it with the File menu (if it is not still open), then compile and run it by pressing F9 or
by selecting
Run
in the
Run
menu. The
STDIO
window will open and will display a small
square bouncing around in a box.
This program shows that the CPU is working.
2.6 Where Do I Go From Here?
NOTE: If you purchased your LP3500 through a distributor or Rabbit partner, contact the
distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
•
Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
and at www.rabbit.com/forums/ .
•
Use the Technical Support e-mail form at www.rabbit.com/support/ .
If the sample program ran fine, you are now ready to go on to explore other LP3500 fea-
tures and develop your own applications.
Chapter 3, “Subsystems,” provides a description of the LP3500’s features, Chapter 4,
“Software,” describes the Dynamic C software libraries and introduces some sample pro-
grams. These sample programs can be used as templates for applications you may wish to
develop.