User’s Manual
79
A
PPENDIX
C.
D
EMONSTRATION
B
OARD
C
ONNECTIONS
Appendix C shows how to connect the Demonstration Board to
the Coyote.
C.1 Assemble Wire Harness
Before you can connect the Demonstration Board to the Coyote to run the sample pro-
grams based on the Demonstration Board, you will need to assemble a wiring harness
using the friction-lock connectors and crimp terminals supplied with the BL2500/OEM2500
Development Kit. In addition, you will need:
•
Wire—22 to 30 AWG (0.33 mm
2
to 0.049 mm
2
) for the 0.1" crimp terminals,
22 to 26 AWG (0.33 mm
2
to 0.13 mm
2
) for the 0.156" crimp terminals
•
Wire cutters and wire insulation stripper
•
Crimp tool (pliers may be used, but a crimp tool provides a better crimp with a stronger
force)
Rabbit sells a crimp tool and a Connectivity Kit that contains additional friction-lock con-
nectors and crimp terminals. Table 3 in Chapter 3 provides information on specific friction-
lock connectors and crimp terminals to be used with the various headers on the BL2500.
Contact your authorized Rabbit distributor or your sales representative for more information.
Summary of Contents for Coyote BL2500
