Rabbit Coyote BL2500, User Manual

Page: 62 / 107

56 Coyote (BL2500)
Writes the calibration constants, gain, and offset for an output based on its designated channel code
position into global table _adcCalibS . Use the sample program USERBLOCK_INFO.C in
SAMPLES\USERBLOCK to get the addresses reserved for the calibration data constants and the
addresses available for use in your program.
NOTE: This function cannot be run in RAM.
PARAMETER
channel
is the output channel 0 or 1: 0 for DA0, 1 for DA1
RETURN VALUE
0 if successful
-1 if invalid address or range
SEE ALSO
anaOutEERd, anaOutCalib
int anaOutEEWr(unsigned int channel);