86
Smartcat (BL2100)
3. Line up the colored edges of the programming cable when reconnecting the program-
ming cable. Reconnect the programming cable as shown in Figure C-10, being careful
to align the pins with the jack
Figure C-10. Reconnect Programming Cable
Once you have finished programming the LCD/keypad module, you should disconnect the
programming cable from the BL2100 programming port, remembering to first remove, or
at least lift up, the LCD/keypad module, disconnect the programming cable, and finally
mount the LCD/keypad module back firmly on the BL2100 main board.
PROG
DIAG
Line up colored edges
when reconnecting
programming cable.
To PC
COM
port
To
BL2100
programming port
Summary of Contents for BL2100
