User’s Manual
13
5. Connect the power supply.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The BL2100 Tool Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K., and
European style plugs. Snap in the top of the plug assembly into the slot at the top of the
AC adapter as shown in Figure 5, then press down on the spring-loaded clip below the
plug assembly to allow the plug assembly to click into place.
Connect the bare ends of the power supply to the
+RAW
and
GND
positions on screw-
terminal header J5 (IDC header J4) as shown in Figure 6.
Figure 6. Power Supply Connections
6. Apply power.
Plug in the AC adapter. If you are using your own power supply, it must provide 9 to
36 V DC (13 to 36 V DC if you intend to use the full range of the D/A converter
outputs)—voltages outside this range could damage the BL2100.
CAUTION:
Unplug the power supply while you make or otherwise work with the connections
to the headers. This will protect your BL2100 from inadvertent shorts or power spikes.
NOTE:
A hardware RESET is done by unplugging the AC adapter, then plugging it back in.
Summary of Contents for BL2100
