19724 MICROWAVE SENSOR FOR D10
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
19724 is used with a
120-277VAC
dimmable driver and comes with a sensor antenna. Sensor is shipped with Factory Settings
outlined below under
DIP Switch Settings.
If settings other than factory pre-sets are desired, the consumer may change DIP
Switch Settings. For more detailed control of the sensor, the consumer can purchase MVSREM wireless commissioning tool
(remote) to re-program sensor settings.
SPECIFICATIONS
Sensor is not suitable for wet locations.
DIP Switch Settings
Switch positions referred to as R for right position and L for left position when
looking at sensor in orientation shown in Fig. 2, in which all switches are R.
See Fig. 1 and 2 for each setting’s corresponding switches. Setting options for
each category are noted in (parenthesis) below.
Factory Settings:
designated in
bold
for each category
Detection Area:
Time Delay:
how long lamp remains on at 100% after last
recognized motion
• 100% (RR)
•
75% (RL)
•
50% (LR)
•
10% (LL)
• 5s (RRR)
•
30s (RRL)
•
1min (RLR)
•
5min (RLL)
•
10min (LRR)
•
20min (LRL)
•
30min (LLL)
Fig. 2
Adjustable
Detection Area
Time Delay
Daylight
Sensor
Cut Off
Period
Dim Level
Sensor
Antenna
Interface
+
-
0-10V
L’ N N L
DIP Switches
Daylight Sensor:
Cut Off Period:
how long reduced light output lasts after
time delay period before fixture switching off
Dim Level:
light output level after time delay
• Disabled (RR)
•
5 fc (Daylight) (RL)
•
1 fc (Twilight) (LR)
•
.2 fc (Darkness) (LL)
•
0s (RRR)
• 10s (RRL)
•
1min (RLR)
•
5min (RLL)
•
10min (LRR)
•
30min (LRL)
•
1hr (LLR)
•
Always (LLL)
• 10% (RR)
•
20% (RL)
•
30% (LR)
•
50% (LL)
L R
DIP SWITCHES
Factory Settings shown below
L’ = driver
L = power source
Fig. 1
19724 Sensor
Antenna
Summary of Contents for HALV
Page 5: ......
