manualshive.com logo in svg

RAB GoodNight Light, Installation Manual, Page: 15 / 16

Share
Download
RAB GoodNight Light Installation Manual Download Page 15

15

Limited Warranty

Your Good Night Light will be
promptly replaced or repaired, at 
our option, if it proves to be defective
in workmanship or materials within 5
years of purchase.

For repair or replacement, return the
product freight prepaid and insured
to:
RAB Lighting
170 Ludlow Avenue
Northvale, NJ 07647

The product should be packed 
carefully. Please include your sales
receipt and a description of the problem.

If the sensor is out of warranty or
damage is unrelated to its original
manufacture, return your unit freight
prepaid to the address below. Please
include a description of the problem
and a check for $20.00 (made out to
RAB Electric). We will repair or
replace your unit promptly.

Under no circumstances shall RAB
Electric be liable for any incidental or
consequential damages arising out 
of or in connection with the use or
performance of this product or other
indirect damages with respect to loss
of property or revenue or cost of
installation, removal or re-installation.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state.
Good Night Light is designed to
detect people or cars in the detection
area. It should not be construed as a
theft or crime prevention device. RAB
does not accept responsibility for any
damages resulting from intrusion or
other crimes.

Toll Free
Technical Assistance

If you need technical assistance,
please do the following:

1. Re-read the Technical Tips sections

of this manual.

2. Call the Tech Help Line

at 888 RAB-1000, 8AM to 6PM
Eastern Time M-F and we will be
glad to help you. Before you call,
please have the following informa-
tion handy:

a) Catalog number of your unit;
b) Wattage, types and locations of

lights connected to the sensor;

c) The electrical circuit on which the

sensor is installed. What else does
it feed? How is the sensor power
switched?

d) Serial Number (4 digits) on the

back of the sensor.

e) This installation Manual

Note: RAB Electric cannot give 
electrical wiring instructions by
phone. Please consult a qualified
electrician.

Summary of Contents for GoodNight Light

















Reviews:

No comments