INSTRUCTIONS
FIELD-ADJUSTABLE FFLED® INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing the fi xture. No user serviceable parts inside.
KNUCKLE MOUNTING
TRUNNION MOUNTING
Pivot Bolts
(Suitable for FFLEDXS, FFLEDS, FFLEDM Only)
(Suitable for FFLEDM, FFLEDL Only)
)
Knuckle Mount
Locking Screw
Locking Screws
Fig: 1
Fig: 2
1.
Loosen the
Pivot Bolts
and angle
Locking Screws
(Fig. 2)
.
2.
Adjust fi xture to desired angle.
3.
Tighten
Pivot Bolts
and angle
Locking Screws
.
1.
Seal
Knuckle Threads
using Tefl on tape or silicone sealant
(not provided)
.
2.
Secure the LED fl ood to a 1/2” NPS hole in a junction box or
landscape post
(supplied by other)
.
3.
Plug all unused holes and seal threads with silicone.
4.
The swivel
Knuckle
on the LED fl ood allows 180° of vertical
aiming adjustment depending on mounting location. Loosen
Locking Screw
and adjust
Fixture
to desired angle
(Fig. 1)
.
Knuckle Threads
