WPLED52 Series INSTALLATION INSTRUCTIONS
TROUBLESHOOTING
1. Check that the line voltage at the fixture is correct.
Refer to wiring directions.
2. Is the fixture is grounded properly?
3. Is the photocell, if used, functioning properly?
WPLED52-IN-0711
WIRING
Universal voltage driver permits operation at 120V to
277VAC, 50 or 60 Hz except fixtures factory ordered
with a 120V photocell (/PC)
1. Connect the BLACK fixture lead to the
(+) LINE supply lead.
2. Connect the WHITE fixture lead to the
(-) COMMON supply lead.
3. Connect the bare copper Ground wire from fixture
to supply ground.
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool
enough to touch. Do not clean or maintain while
fixture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open the fixture to clean the LED. Do not
touch the LED.
WPLED52 Cool
WPLED52N Neutral
