Wood ADA Locker Bench (without back)
Assembly & Installation Instructions
Thank you for selecting Salsbury Wood ADA locker benches. We are confident that the quality and construction of this product will provide years of
maintenance free use.
Preliminary Notes
There are two basic steps to assembly and installation:
1. The bench pedestals must be assembled to the bench top.
2. The bench assembly must be bolted to the floor.
Failure to bolt the bench assembly to the floor could result in
injury to persons sitting on the bench.
Since various types of floors require different types of fasteners, floor
installation hardware is not provided.
Two bench pedestals are provided for each bench top. All necessary
holes are pre-drilled in the wood bench top. Eight (8) 1/4” diameter x
1” long lag screws are provided for attaching the bench pedestals to
the bench top.
Assembly
Place the bench top upside down on a flat surface, so that the pre-
drilled holes are facing up. Align the two bench pedestals with the two
rows of pre-drilled holes, placing the plate with non-rounded corners
against the bench top as shown in the diagram. Fasten pedestals to
the bench top using the included lag screws.
Complete the installation by fastening the assembled bench to
the floor.
