FCC Information:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and 2. This device must
accept any interference received,
including interference that may cause
undesired operation. Note: This device
has been tested and found to comply
with the limits for Class B digital devices
pursuant to Part 15 Subpart B, of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential environment.
This equipment generates, uses, and can
radiate radio frequency energy, and if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try and correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
To comply with the FCC's RF exposure
limits for general population /
uncontrolled exposure, this transmitter
must be installed to provide a separation
distance of at least 20 cm from all
persons and must not be co-located or
operating in conjunction with any other
antenna or transmitter.
CAUTION: Changes or modifications to
this equipment not expressly approved
by RAB Lighting may void the user’s
authority to operate this equipment.
