CANVAS INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
CANVAS-IN-1014
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open the fixture to clean the LED. Do not touch
the LED.
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
US: pat. D679,856; MX: 40069; CA; CN; TW: pat pending;
ACCESSORIES
Chrome Wire Guard:
GDEZLED78W
Poly Shield:
GDEZLED78P
Lens & Door Replacement:
LCANVAS78 (bronze)
LCANVAS78W
(white)
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4) #8-32
Stainless Steel Screws
. Screws are provided with the
accessory. Guard and shield may be used together. See
figure 1 for Guard. See figure 2 for Shield
1. Line up guard or shield with existing pre-drilled holes in
frame as shown, tighten screws.
Stainless Steel
Screws (4)
Stainless Steel
Screws (4)
Figure 1
Figure 2
CANVAS78 6Hx4V Cool
CANVAS78N 6H x 4V Neutral
CANVAS78Y 6H x 4V Warm
TROUBLESHOOTING
1. Check that the line voltage at the fixture is correct. Refer
to wiring directions.
2. Is the fixture grounded properly?
3. Is the photocell, if used, functioning properly?
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2014 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]