7
•
Reset your flashlight - i.e., remove the battery for 60 seconds and
reinstall. Alternatively, you can turn on your flashlight, remove the
battery compartment (your flashlight will go out) and then reinstall
the battery compartment without waiting. Your flashlight will light
dimly for 5 seconds to indicate the reset.
•
Press and hold the button before the dim reset indication turns off.
The light will become brighter for 10 seconds and then turn off.
Release the button when your flashlight turns off.
•
Note:
your flashlight will display 5 rapid flashes and no settings are
changed if you release the button before your flashlight turns off.
•
Note:
your flashlight will display 10 very rapid flashes if there is
insufficient power to memorize the original factory settings.
9. Enabling Customization
Customization is disabled by default. Follow these steps to enable
Customization:
•
Reset your flashlight - i.e., remove the battery for 60 seconds and
reinstall. Alternatively, you can turn on your flashlight, remove the
battery compartment (your flashlight will go out) and then reinstall
the battery compartment without waiting. Your flashlight will light
dimly for 5 seconds and turn off to indicate the reset has
completed. You have 10 seconds following the reset to begin the
next step. After 10 seconds, your flashlight will ignore attempts to
enable Customization.
•
Perform a 20-click, press and hold. You don
’
t have to count the
clicks because you are allowed to enter more than 20 clicks prior to
the press and hold. After the 20
th
click your flashlight stops turning
off with every other click.
•
Hold the button until your flashlight turns off. Your flashlight will
display a dim-to-bright sequence to indicate it is enabling
Customization and then turn off. Release the button after your
flashlight turns off. Customization is now enabled.
•
Note:
your flashlight will display 5 rapid flashes and Customization
is not enabled if you release the button before your flashlight turns
off.
