manualshive.com logo in svg

R82 Mustang, User Manual, Page: 21 / 24

Share
Download
R82 Mustang User Manual Download Page 21

21

G

B

G

B

CARE AND MAINTENANCE

FRAME

Check all screws on a regular  basis. Also, it is important to keep the Mustang clean, both for sa-

nitary reasons and to prolong the life of the product. Take special care to clean the holes for the 

directional stabilizers.

 

Wash the frame with car shampoo or dish washing liquid. If the Mustang is 

overly dirty, a grease remover may be used.

INSPECTION

It is important to tighten all screws on the walking aid on a regular basis. All screws which se-

cure the accessories must be checked, at least once a month. Also, it is important to check for 

any cracks or faults in the frame, PVC parts, etc.

REPAIR

If there is a problem with your Mustang you should contact your dealer at once. Defective Mustangs 

should not be used. If your Mustang needs reconditioning or repair, only original R82 parts may be 

used.  Accessories or available spare parts which are broken can be sent to R82 for repair. If there 

are problems with the frame, the whole Mustang needs to be returned to R82 for repair. R82 will 

not be held responsible for damage or injury caused by use of non-original parts or repairs made 

by a non-authorized R82 person.

Summary of Contents for Mustang

























Reviews:

No comments