R82 Mustang, User Manual, Page: 19 / 24

19
A
1.
2.
3.
B C
G
B
G
B
HEIGHT SETTINGS
The Mustang comes as standard with the height
settings in Hole 2. Various height settings can be
made in order to lower or heighten the Mustang.
1) Remove the quick release (A)
2) Loosen the screws (B)
3) Remove the screw (C)
4) Adjust the frame and remount the screw (C)
in one of the holes in the frame. Fasten the
screws (B) and remount the quick release (A).
Make sure that all screws and handles are
tightened before use. Frequently check all
screws and handles
Be aware not to get your fingers caught in
the holes in the frame.
Size 1 Size 2
Hole 1 Hole 2 Hole 3 Hole 1 Hole 2 Hole 3
Height, floor to axila 46½-65 cm 43-65 cm 38-65 cm 61½-80 cm 60-80 cm 59-80 cm
Height, floor to axila, with arm prompts mounted 51-65 cm 47½-65 cm 42-65 cm 65½-80 cm 64-80 cm 63-80 cm
Seat height from floor 26-37½ cm 17-35 cm 11-29 cm 34½-51½ cm 33-50 cm 32-49 cm
Angle, chest support bar
5° to 35° 0 to 30° -5 to 20° 5° to 35° 0 to 30° -10° to 20°
The Mustang is measured with the centre bar in vertical position
Size 3 Size 4
Hole 1 Hole 2 Hole 3 Hole 1 Hole 2 Hole 3
Height, floor to axila 72-105 cm 71-105 cm 69-105 cm 89-130 cm 87-130 cm 85-128½ cm
Height, floor to axila, with arm prompts mounted
76½-105 cm 75½-105 cm 73
½
-109
½
cm 93½-130 cm 91½-130 cm 89½-130 cm
Seat height from floor 34-70 cm 31-68 cm 29-66 cm 50-85½ cm 49-85 cm 46-82 cm
Angle, chest support bar
-3° to 45° -6° to 40° -8° to 48° -5° to 33° -7° to 35° -10° to 29°
The Mustang is measured with the centre bar in vertical position