R82 Cougar 80196 User Manual Download Page 2

Page: 2 / 32

CONTENTS

Intended purpose - Declaration of Conformity -

Warranty ....................3

Safety ...................................................................................................4

Service..................................................................................................5

Accessories ..........................................................................................6

T-tool.....................................................................................................8

Sitting and Transferring from the Cougar .............................................9

Gas spring adjustment........................................................................10

Quick release wheels .........................................................................11

Angling the seat & back ......................................................................12

Mounting the push brace ....................................................................13

Adjustment of the push brace .............................................................13

Anti-tip device .....................................................................................14

Adjusting the lumbar support ..............................................................14

Leg rests and foot plates ....................................................................15

Seat height adjustment .......................................................................16

Adjustment of the slide bar function ...................................................16

Seat depth adjustment........................................................................17

Wheel lock ..........................................................................................18

Drum brake .........................................................................................19

Wheel combinations ...........................................................................19

Changing point of gravity ....................................................................20

Cougar back .......................................................................................21

Mudguard ...........................................................................................21

Armrests with side plates and armrest extensions .............................22

Spoke protectors ................................................................................23

Mounting of foot support .....................................................................23

Leg support.........................................................................................24

Cane holder ........................................................................................25

Vent tray for ventilator.........................................................................25

Tray ....................................................................................................25

Pommel .............................................................................................26

Hip supports .......................................................................................26

Head support ......................................................................................27

Vests & belts .......................................................................................27

Fix-locks .............................................................................................28

Product identification ..........................................................................29

Measurements ....................................................................................30

Product safety.....................................................................................31

Technical data.....................................................................................32

Manufacturer ......................................................................................32

Summary of Contents for Cougar 80196
































Search results

Summary of Contents for Cougar 80196

Reviews:

R82 Cougar 80196, User Manual, Page: 2 / 32

Search results

Summary of Contents for Cougar 80196

Reviews: